P.wheel App Setup Guide: How to Download, Connect & Use Your Electric Bike Booster

If you just received your P.wheel, this guide walks you through everything — from downloading the app to reading real-time data on your first ride.

Step 1: Download the P.wheel App

Available on both Android and iOS. Search for "P.wheel" in the App Store or Google Play, or scan the QR code below to install the official app.

Step 2: Mount First, Power On Second

⚠️ Important: Always mount P.wheel onto your seatpost BEFORE powering it on. This is required for gyroscope calibration. If you power it on before mounting, long-press the power button for 10+ seconds to reset.

Step 3: Connect via Bluetooth (the Right Way)

Do NOT pair P.wheel through your phone’s system Bluetooth settings. Here’s the correct way:

1. Open the P.wheel App
2. Tap the Bluetooth icon inside the app to scan for devices
3. Select your P.wheel from the list to pair

If you’ve already paired via system Bluetooth by mistake:

1. Go to your phone’s Bluetooth settings
2. Delete / forget the P.wheel device
3. Re-open the app and pair from there

Note: P.wheel can only be paired with one device at a time. Always use the app — not your phone’s system Bluetooth — to connect.

Step 4: Switch Assist Modes

P.wheel offers 4 assist levels:

Without the app, P.wheel defaults to MOD mode. Connect the app to access all 4 modes.

Step 5: Read Your Real-Time Data

Once connected, the app dashboard shows:

• Battery level (SOC %)
• Trip distance, duration & average speed
• Odometer statistics
• Real-time power output

P.wheel Specs at a Glance

Ready to ride smarter? Shop P.wheel now →