Sada pro přestavbu e-kola na přední kolo Geeko 100G

About this item

Ať už každodenně dojíždíte, jezdíte po městě nebo prozkoumáváte okolí o víkendech, Geeko-Front je vaše ideální sada pro přestavbu na elektrické kolo.

Geeko-Front je neuvěřitelně snadno instalovatelná sada pro přestavbu e-kola. Skládá se pouze ze tří částí: předního motoru Geeko, senzoru PAS a lahve Geeko.

Instalace předního motoru Geeko je hračka. Nemusíte se starat o kazetu a přehazovačku. Jednoduše namontujte kolo a hotovo. Senzor PAS lze rychle nainstalovat bez demontáže kliky. S 12 magnety je vysoce citlivý a mimořádně spolehlivý.

Baterie/řadič/displej 3 v 1 ve tvaru lahve na vodu udržuje vaše kolo elegantní. Modulární design zajišťuje mechanický výkon, voděodolnost IP67 a správu energie na základě dat pro spolehlivé jízdy za všech podmínek.

Geeko Front Motor & PAS Sensor

Lightweight & High-Torque: 2.8KG, 4.33 gear ratio, 40NM (350W) torque—quiet, durable power for tough rides.
Clutch-Enabled Free Pedaling: Built-in clutch eliminates magnetic resistance—pedal smoothly even when the battery runs out, just like a regular bike.
Please note that currently Geeko Front Motor do not support thru-axle bike.

Default Droupout & Slot Width

Dropout: 100MM
Slot width: 10MM

Customization Options

Dropout: 80MM/75MM
Slot width: 9MM/8MM

Double-wall aluminum rim: Precision-machined
High-strength PVC tire pads: Withstand a maximum of 100 psi tire pressure
Radial/axial deviation: < 0.5-1 mm
13G (2.2 mm) high-tensile steel spokes
36-spoke configuration: Optimized for e-bike torque loads
Spoke tension: 25-30 kgf
Wheel size compatibility: 16-29 inches (650b/700c/29er)

Default Specifications

Matte black rim with polished silver sidewalls (rim/disc brake compatible)
Black spokes
Black motor housing

Customization Options

Pure black disc brake rim
Silver rim
Silver spokes
Silver motor housing

Zodiac – New generation of cadence sensors

Fits 98% of bike frames.
Simple installation without dismantling the cranks.
3 times the magnet sensing area.
HMI panel.

Zodiac - Cadence Sensor V2 for Geeko-Front:

Click to watch the video

Bionic torque power, an electric power distribution and control system independently developed by 100G, closely approximates traditional torque-assist systems by offering cyclists a human-like, fluid riding experience that significantly enhances comfort and efficiency.

Linear, natural assist power ideal for multi-gear bikes
Each level achieves maximum speed
Levels differ by motor boost power (vs. speed in other systems)
Independent max speed/current settings per level
Auto uphill enhancement increases power on inclines
50% longer range: 130km (10Ah) / 200km (15Ah)

Geeko Bottle

6 Bottles x 4 Colors
IPX7 Waterproof Level
3 Points Fixation: Battery firmly secured as a rock

*Mini and Solid do not have Part 02(PVC rubber band)

Intelligent Display

Featuring a bottle cap-integrated design with built-in Bluetooth 5.0, this display combines a 3-button interface and 1.25-inch digital screen for classic electric bicycle HMI, offering IPX7 waterproof protection (full battery bottle immersion resistance) and low-power operation (standby current ≤12mA).

Real-Time Monitoring

Battery level (1% precision)
Assist level
Controller connectivity (plug-and-play supported)
APP Bluetooth status (OTA updates enabled)
Flashing error code for fault Diagnosis

Operation Controls

Power On/Off
0-5 assist level adjustment
Parameter settings (Includes 18 functions like wheel diameter calibration/speed limit reset)

APP

The 100G/Geeko app features an intuitive interface for better interaction, with no setup required and simple +/- button controls that make it easy for everyone to use.

Key functions include:

Monitor speed, battery level, and ride stats in real time
Adjust assist levels (0-5) and modify settings
Fault diagnosis
OTA firmware updates

Controller

The controller is enclosed in an aluminum housing with integrated heat dissipation fins at the bracket base, ensuring efficient heat dissipation. Adaptive thermal management reduces power output incrementally under high-temperature conditions to prevent overheating.

Overheat Protection: Maintains safe operating temperatures for long-term performance
IPX7 Waterproofing: Fully potted with thermally conductive epoxy for submersible protection (1m depth, 30-minute immersion)
All-Weather Operation: Ensures reliable functionality in rain, mud, or extreme humidity

Modular Expansion:

Supports plug-and-play expansion, allowing users to customize their e-bike with:

Front/rear light
Handlebar display
USB Charging
Throttle/Brake lever

Will 100G Geeko E-Bike Kit Fit My Bike?

1. Will Geeko Motor Fit My Bike?

Geeko kits are designed to fit most bikes. Even if a thru axle bike, Geeko kit will fit.

1.1 Geeko-Front

Following front forks can fit Geeko-Front


Raised quick release nut	Front fork is open

Following front forks can not fit Geeko-Front

No raised quick release nut

(thru-axle)

Front fork is closed

(thru-axle)

2. Default Motor & Motor Customisation

Regular Geeko motors are adapted to the most common bike frames, for other frames you can use the customisation service to make Geeko motors better fit your bike.

2.1 Geeko-Rear

Geeko-Rear requires a rear fork spacing of 135mm and a slot width of 10mm, as shown below.

Also we provides motor customisation service for fork spacing 130MM if your bike is a rim brake roadbike.

Following rear forks no need customisation

Dropout 135MM & slot width 10MM

Following rear forks need customisation

Dropout 130MM

Slot width 9MM

Thru axle 142/144MM

2.2 Geeko-Front

Geeko-Front requires a fork spacing of 100mm and a slot width of 10mm; and space is required at the pedal bottom bracket to mount the sensor, as shown below.

We also provide motor customisation service if you have a folding bike with fork spacing 80MM/74MM. There is also a special version fork slot width 8MM for Brompton bikes.

Following front forks no need customisation

Dropout 100MM & slot width 10MM

Following front forks need customisation

Dropout 80MM / 74MM

Slot width 9MM / 8MM

3. Will My Own Cassette Fit?

Following cassette can fit Geeko-Rear

Shimano HG Cassette

Following cassette should be replaced by Shimano HG cassette

Flywheel

Shimano MS Cassette

SRam Cassette

Campagnolo Cassette

4. Will My Own Brake Disc Fit?

Following brake disc can fit Geeko

6 screws, 160MM

6 screws, 180MM

Following brake disc need to be replaced

140MM

140MM to

160MM adapter

6 screws

160MM

Center-locked

6 screws

5. Will My Own Tyre Fit?

Following tyre width can fit Geeko

Following tyre width need to be replaced

Frequently asked questions

EU & UK Customers: No additional fees!

We provide full customs clearance service for all 27 EU countries + United Kingdom:

✅ Price includes all taxes and duties - The price you see is the final price
✅ We handle customs fees - No additional customs fees for you
✅ We pay duties and taxes - All import duties and VAT paid by us
✅ No hidden fees - No unexpected additional charges
✅ Smooth delivery - We handle all customs procedures for fast delivery

For customers outside EU & UK: You are responsible for any applicable customs duties, taxes, and import fees in your country.

Our full customs clearance service covers all 27 EU countries + United Kingdom:

Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, and United Kingdom.

For EU & UK customers, we ship DDP (Delivered Duty Paid), meaning all customs duties, taxes, and import fees are included in your purchase price. You won't receive any surprise bills from customs or delivery companies.

We use a pre-authorization payment process for all orders:

Friction drives & conversion kits:

Your card is pre-authorized at checkout
We verify compatibility within 24 hours
Payment is captured after compatibility confirmation
If incompatible, the pre-authorization is released (no charge)

All other products:

Your card is pre-authorized at checkout
Payment is captured within 24 hours
No compatibility verification needed

You'll receive email confirmation once payment is processed.

Pre-authorization temporarily reserves funds on your card without charging you immediately. This allows us to verify compatibility for technical products and ensure order accuracy before final payment. The charge is completed within 24 hours for standard items, or after compatibility confirmation for friction drives and conversion kits.

We process and ship most orders within 1-3 business days. Special products may require 7-14 days processing time.

Delivery time depends on your shipping method:

EU Express Delivery (EU 27 only): 2-8 days from our France factory
Standard Air Shipping: 8-15 business days from Hong Kong
Sea Freight (for battery kits): 15-45 business days from Hong Kong

Please note: Friction drives and conversion kits require a 24-hour compatibility verification before shipping.

You'll receive tracking information via email as soon as your order ships, typically within 1-3 business days after placing your order.

Please note: Your tracking may initially show "Awaiting Pickup" or similar status until the package clears customs and enters the local delivery network. This is normal and doesn't indicate a delay.

Total delivery time = processing time + shipping time.

Processing: 1-3 business days for most items (7-14 days for special products)

Shipping time depends on your method:

EU Express Delivery (EU 27 only): 2-8 days
Standard Air Shipping: 8-15 business days
Sea Freight (battery kits): 15-45 business days

Total estimated delivery:

EU Express: 3-11 days total
Standard Air: 9-18 business days total
Sea Freight: 16-48 business days total

Note: Friction drives and conversion kits require 24-hour compatibility verification, which may add one day to processing time.

Tracking updates may be delayed during customs clearance, especially for international shipments. If your tracking hasn't updated for several days after the initial scan, please contact us at support@diyebicycle.com.

Yes! We welcome special orders and product requests. Our procurement team can source products that align with our DIYebicycle focus.

For out-of-stock items:

Contact us at support@diyebicycle.com with the product you need
We'll provide an estimated restock or procurement timeline
You'll be notified as soon as the item is available

For product requests: If you're looking for a product we don't currently carry, we'd love to hear from you! Products that fit our catalog may qualify for our Early Adopter Program, where you can:

Be the first to test new products
Receive significant discounts as a trial user
Help shape our product selection

Simply email us at support@diyebicycle.com with your product request and we'll let you know if it qualifies.

Sada pro přestavbu e-kola na přední kolo Geeko