Easy To Install — 4 Simple Steps
No special tools or technical skills required.
Step 1. Install the motor wheel
Step 2. Connect the motor with the cable
Step 3. Install and connect the battery
Step 4. Done — your ebike is ready to ride
New Upgraded Motor (S110 & P110)
1. Enhanced Heat Dissipation — Keyde’s customized disc brake rotor design allows the rotor and motor housing to work together for more effective cooling.
2. Improved Waterproofing — Redesigned sealing for stronger protection against rain and splashes.
3. Greater Stability — The flywheel assembly has been upgraded from a 3-claw to a 6-claw structure, with click count increased from 36 to 78 — delivering significantly improved reliability and smoothness.
Keyde App & BTD260 Wireless Display
Choose your preferred control method — app or display (cannot be used simultaneously).
- Swipe to shift gears on the fly
- Customize assist levels and parameters
- Monitor speed, battery level, and riding data in real time
- Compatible handlebar diameters: Φ22.2 / Φ25.4 / Φ31.8mm
Dual Assist Modes: Torque & Speed
* First-time torque mode users must complete a one-time horizontal calibration. Both modes can be switched freely at any time.
Torque Mode
Assistance scales with how hard you pedal — push harder, get more power. Ideal for climbing hills and variable terrain.
Speed Mode
Assistance scales with your pedaling cadence — the faster you spin, the more support you get. Perfect for flat roads and commuting.
Automatic Slope Detection
One-Time Horizontal Calibration
Before your first ride in torque mode, complete a quick horizontal calibration:
- Place your fully assembled ebike upright on level ground.
- Open the display or app settings and tap “H Adjust”.
- When “OK” appears, calibration is complete — you’re ready to ride.
Compatible with 99% of Bicycles
 Road Bike |
 Mountain Bike |
 Folding Bike |
 City Bike |
Why Choose Keyde?
 EU CE CertifiedMeets European safety and quality standards — built to last. |
 International Invention PatentsProprietary technology recognized across global markets. |
Frame Compatibility Requirements
- Rear dropout slot width: 10mm
- Rear dropout spacing: 135mm
- Drivetrain: Disc brake or V-brake, 7–11 speed cassette
Rim & Tire Size Guide
Please verify your tire dimensions match the specifications below before ordering.
| Rim Inner Width (mm) | Applicable Tire Width (mm) | Applicable Tire Width (inch) |
|---|---|---|
| 13 | 20–26 | 0.80–1.00 |
| 14 | 20–32 | 0.80–1.25 |
| 16 | 23–38 | 0.90–1.50 |
| 17 | 25–43 | 1.00–1.70 |
| 19 | 28–51 | 1.10–2.00 |
- Disc brake rims have a black sidewall; V-brake rims have a silver sidewall.
- Rim sidewall height: 30mm.
- Rim strip is included; tire is not.
Spoke Holes
Spoke hole placement is random. Contact us if you have specific requirements.
Battery Specifications
All batteries include a built-in BMS protection system.
| Specification | BI3607 (7Ah) | BI3611 (10.5Ah) | BI3615 (15Ah) |
|---|---|---|---|
| Rated voltage (V) | 36 | 36 | 36 |
| Rated capacity (Ah) | 7 | 10.5 | 15 |
| Voltage range (V) | 28–42 | 28–42 | 28–42 |
| Battery capacity (Wh) | 252 | 378 | 540 |
| Maximum current (A) | 20 | 20 / 40 | 40 |
| Charge current (A) | 3 | 3 | 3 |
| Charge time (h) | 2.5 | 3.5 | 5 |
| Cycle life | ≥1,000 cycles | ≥1,000 cycles | ≥1,000 cycles |
| Weight (kg) | 1.2 | 1.8 | 2.5 |
| Estimated range (km) | 50–80 | 80–120 | 120–180 |
* Range estimated under: 75kg rider, 700C road bike, assist level 1, flat road, 26°C, no wind.
Motor Specifications
Wireless Rear Hub Motor — all models run on 36V.
| Specification | P100 | P110 | S100 | S110 |
|---|---|---|---|---|
| Diameter (mm) | 102±1 | 112±1 | 102±1 | 112±1 |
| Weight (kg) | 1.8 | 2.4 | 1.7 | 2.3 |
| Rated voltage (V) | 36 | 36 | 36 | 36 |
| Rated power (W) | 250 | 250 | 250 | 250 |
| Max power (W) | 500 | 750 | 300 | 500 |
| Efficiency (%) | ≥90 | ≥90 | ≥88 | ≥89 |
| Max torque (N·m) | 30 | 45 | 20 | 35 |
Important Notes
Disc Brake Rotor Compatibility
 |
For: S100, S110, P100, P110 front hub motors & S100, P100 rear hub motors
|
 |
For: S110, P110 rear hub motors & thru-axle rear hub motors Use the Keyde customized disc brake rotor (160mm diameter). |
Using a Third-Party Battery
 |
Battery voltage must match the motor voltage. Minimum output current: ≥ 20A (P110 motor requires ≥ 30A). Observe correct polarity as shown in the diagram. |
Disc Brake Installation
 |
Always use the disc brake screws included with the motor to secure the rotor. Using other screws may damage the motor. (Skip this step if your motor uses V-brake.) |
