LVBU MRT Serijos Galinis Rato Stebulės Variklis su Integruotu Kasetės Sukimo Momento Jutikliu
Pagrindiniai privalumai
Šio produkto pristatymo informacija
📦 Užsakymo peržiūra: Per 24 valandas
🚚 Išsiuntimas: 1-3 darbo dienos
✈️ Oro krovinių gabenimas: 8-15 darbo dienos
🏠 Pristatyta
LVBU MRT yra pavara galinis stebulės variklis su integruotu kasetės sukimo momento jutikliu — vidurinio variklio lygio vairavimo patirtis stebulės variklio formatu. Realiuoju laiku matuoja pedalų jėgą sklandžiai ir jautriai pagalbai. Lengvas aliuminio korpusas, IP65, 4 integruoti jutikliai (sukimo momentas, kadencija, temperatūra, greitis), PA66 reduktoriai ir suderinamumas su 16"–700C rato dydžiais.
The LVBU MRT Series features a built-in cassette torque sensor — delivering a mid-drive-like riding experience in a compact rear hub motor. Real-time pedal force measurement enables smooth starts and consistent, responsive acceleration.
Precision spray-finished surface for superior scratch resistance and an environmentally friendly manufacturing process.
The torque sensor is integrated directly into the cassette, measuring your pedal force in real time so the motor responds instantly to every stroke.
Automated machine winding ensures high consistency and precision across every unit.
Silicon steel laminations for efficient magnetic flux and reduced core loss.
20 high-strength permanent magnets for powerful and stable torque output.
PA66 nylon reduction gears — cold and heat resistant, high toughness, and low friction coefficient for quiet, long-lasting operation.
The MRT motor combines four precision sensors to deliver intelligent, adaptive power assist.
 |
Cadence Sensor 12-magnet high-precision cadence sensor for smooth, real-time pedaling detection. |
 |
Cassette Torque Sensor Built-in highly sensitive torque sensor measures pedal force in real time for natural, proportional assist. |
 |
Temperature Sensor High-precision thermal protection — automatically limits power to prevent overheating. |
 |
Speed Sensor Real-time speed monitoring ensures smooth, comfortable power delivery at every pace. |
The integrated high-sensitivity cadence sensor monitors pedaling speed in real time, allowing the assist system to respond fluidly to changes in rhythm.
Compact design with an exceptional power-to-weight ratio — more torque from a smaller, lighter package.
Engineered for durability under load, the reinforced motor shaft handles demanding terrain and riding conditions reliably.
Sealed to IP65 — protected against dust ingress and low-pressure water jets, suitable for all-weather riding.
9-pin waterproof connector: 3 phase wires, 5 Hall sensor wires, and 1 signal wire — clean and reliable wiring for DIY builds.
Fits most standard wheel sizes: 16", 20", 24", 26", 27.5", 29", and 700C — suitable for a wide range of bike frames and styles.
| Parameter | Value |
|---|---|
| Position | Rear motor |
| Compatible rim size | 16"–29" |
| Structure | Gear Drive |
| Rated Voltage (V DC) | 36 |
| No-load Speed (RPM) | 310 |
| Rated Power (W) | 250 |
| Load Speed (RPM) | 280 |
| Maximum Torque (N·m) | 30–45 |
| Efficiency (%) | >80% |
| Colour | Black |
| Weight (kg) | 2.76 |
| Noise Level (dB) | <55 |
| Operating Temperature | −20–70°C |
| Torque Measurement Range (N·m) | 1–85 |
| Torque Sensor Output Voltage (50 kgf, 170mm crank) | 2.0V ± 0.15V |
| Parameter | Value |
|---|---|
| Speed Detection Signal (Pulse/Cycle) | 6 |
| Reduction Ratio | 1:5.17 |
| Magnet Poles (2P) | 20 |
| Parameter | Value |
|---|---|
| Brake Type | Disc brake |
| Axle Opening Size (mm) | 138 |
| Hub Diameter (mm) | 140 |
| Cable Location | Shaft side, right |
| Cable Length & Spec (mm) | 245, G9.5 |
| Spoke Specifications | 36H13G |
| Hub Type | Cassette |
| Cassette Compatibility | 7S–10S |
| Parameter | Value |
|---|---|
| Waterproof Rating | IP65 |
| Certification | CCC, CQC, CE |
| Salt Spray Test (h) | 48 |
